• TOP
  • Product Search

Product Search

 Wire-saving model(CC-Link spec.) PN-ZERO 2/C-4(CC-Link spec.)     Model number:PN-ZERO /C-4(CC-Link spec.)

PN-ZERO /C-4(CC-Link spec.)

wire-saving  model
Outside dimension  refer to the main body outline dreawing
Product weight  about 3.0kg

 Wire-saving model(Uni-wire spec.) PN-ZERO 2/U-6(Uni-wire spec.)     Model number:PN-ZERO 2/U-6(Uni-wire spec.)

PN-ZERO 2/U-6(Uni-wire spec.)

wire-saving  model
Outside dimension  refer to the main body outline dreawing
Product weight  about 3.0kg

 Wire-saving model(DeviceNet spec.) PN-ZERO 2/D-5(DeviceNet spec.)     Model number:PN-ZERO /D-5(DeviceNet spec.)

PN-ZERO /D-5(DeviceNet spec.)

wire-saving  model
Outside dimension  refer to the main body outline dreawing
Product weight  about 3.0kg

  WRIST COMPLIANCER(LOCK-UP RCC DEVICE)     Model number:WRIST COMPLIANCER(LOCK-UP RCC DEVICE)

WRIST COMPLIANCER(LOCK-UP RCC DEVICE)

WRIST COMPLIANCER(LOCK-UP RCC DEVICE)

  WRIST COMPLIANCER     Model number:WRIST COMPLIANCER(RCC DEVICE)

WRIST COMPLIANCER(RCC DEVICE)

WRIST COMPLIANCER 

  Couple Joint 1Modules Type     Model number:Couple Joint 1Modules Type

Couple Joint 1Modules Type

Couple Joint  1Modules Type

  Couple Joint 2Modules Type     Model number:Couple Joint 2Modules Type

Couple Joint 2Modules Type

Couple Joint 2Modules Type

  Couple Joint 3Modules Type     Model number:Couple Joint 3Modules Type

Couple Joint 3Modules Type

Couple Joint 3Modules Type

 Analog signal model  PN-ZERO 2/36     Model number:PN-ZERO 2/36

PN-ZERO 2/36

Analog signal model
Outside dimension  φ89mmxH172mm
Product weight  3.0kg

 Analog signal model PN-ZERO 2/24     Model number:PN-ZERO 2/24

PN-ZERO 2/24

Analog signal model
Outside dimension  φ89mmxH152mm
Product weight  2.9kg

 Analog signal model  PN-ZERO 2/12     Model number:PN-ZERO 2/12

PN-ZERO 2/12

Analog signal model
Outside dimension  φ89mmxH152mm
Product weight  2.8kg

 Analog signal model PN-ZERO 2/6     Model number:PN-ZERO 2/6

PN-ZERO 2/6

Analog signal model
Outside dimension  φ89mmxH132mm
Product weight 2.6kg

  GC-300A     Model number:GC-300A

GC-300A

Weight capacity(Rated load) 2,940N(300kg)
Outer dimension (When coupled) W355×D265×H165mm
Product weight(Main body) Master Plate 18.5kg
  Tool Plate 9.5kg

  SC04M,SC06M     Model number:GC-300-M(T)-SC04M,SC06M

GC-300-M(T)-SC04M,SC06M

  PC3DM,PC3DT     Model number:GC-300A0M(T)-PC3DM,PC3DT

GC-300A0M(T)-PC3DM,PC3DT

  PC3EM,PC3ET     Model number:GC-300-M(T)-PC3EM/GC-300-M(T)-PC3ET

GC-300-M(T)-PC3EM/GC-300-M(T)-PC3ET

  SC04M,SC06M     Model number:GC-300-M(T)-SC04M,SC06M

GC-300-M(T)-SC04M,SC06M

  PC3DM,PC3DT     Model number:GC-300A0M(T)-PC3DM,PC3DT

GC-300A0M(T)-PC3DM,PC3DT

  PC3EM,PC3ET     Model number:GC-300-M(T)-PC3EM/GC-300-M(T)-PC3ET

GC-300-M(T)-PC3EM/GC-300-M(T)-PC3ET

  USP-100A     Model number:USP-100A

USP-100A

Weight capacity(Rated load) 980N(100kg)
Outer dimension (When coupled)   φ179×H79.5mm
Product weight(Main body) Master Plate 3.5kg
  Tool Plate 2.0kg

  D15U     Model number:USP-100A-M(T)-D15U

USP-100A-M(T)-D15U

3A×15 D-sub contacts
( female receptacle )
※Please use DDK, 17JE-23150-02(DBA)-CG or its equivalent, 
   on the plug side. (Use RoHS-compliant. D-sub plug products.)

  Flex-300A     Model number:Flex-300A

Flex-300A

Weight capacity(Rated load) 2,980N(300kg)
Outer dimension (When coupled) φ259×H116mm
Product weight(Main body) Master Plate 13.2kg
  Tool Plate 7.2kg

  J16A,J16B     Model number:Flex-300A-M(T)-J16A,J16B

Flex-300A-M(T)-J16A,J16B

5A×16 (JM connector)

Use JMR2116M-D for the J16A Master side
Use JMR2116F-D for the J16A Tool side
Use JMR2116MX-D for the J16B Master side
Use JMR2116FX-D for the J16B Tool side

  J32A,J32B     Model number:Flex-300A-M(T)-J32A,J32B

Flex-300A-M(T)-J32A,J32B

5A×32 (JM connector)

Use two JMR2116M-D for the J32A Master side
Use two JMR2116F-D for the J32A Tool side
Use two JMR2116MX-D for the J32B Master side
Use two JMR2116FX-D for the J32B Tool side

  M10A,M10B     Model number:Flex-300-M(T)-M10A,M10B

Flex-300-M(T)-M10A,M10B

13A×10 (MS connector)

Use D/MS3102A18-1P for the M10A Master side
Use D/MS3102A18-1S for the M10A Tool side
Use D/MS3102A18-19P for the M10B Master side
Use D/MS3102A18-19S for the M10B Tool side

  M20A,M20B     Model number:Flex-300A-M(T)-M20A,M20B

Flex-300A-M(T)-M20A,M20B

13A×20 (MS connector)

Use two D/MS3102A18-1P for the M20A Master side
Use two D/MS3102A18-1S for the M20A Tool side
Use two D/MS3102A18-19P for the M20B Master side
Use two D/MS3102A18-19S for the M20B Tool side

  B15NA_B,B15PA_B,B15DA_B     Model number:Flex-300A-M(T)-B15NA_B,B15PA_BMaster side only),B15DA_B(Tool side only)

Flex-300A-M(T)-B15NA_B,B15PA_BMaster side only),B15DA_B(Tool side only)

B15NA/B  NPN output
B15PA/B  PNP output

Receptacle connector: WEBR-2119S-D for B15NA/B and B15PA/B
Receptacle connector: WEBR-2116FS-D for B15DA/B

  E50A,E50B     Model number:Flex-300A-M(T)-E50A,E50B

Flex-300A-M(T)-E50A,E50B

P3WA,P3WB

  P18A,P18B     Model number:Flex-300A-M(T)-P18A,P18B

Flex-300A-M(T)-P18A,P18B

Rc1/8×4

  P14A,P14B     Model number:lex-300A-M(T)-P14A,P14B

lex-300A-M(T)-P14A,P14B

Rc1/4×2

  P38A,P38B     Model number:Flex-300A-M(T)-P38A,P38B

Flex-300A-M(T)-P38A,P38B

Rc3/8×4本

  P3WA,P3WB     Model number:Flex-300A-M(T)-P3WA,P3WB

Flex-300A-M(T)-P3WA,P3WB

Rc3/8×2

  SA,SB     Model number:Flex-300A-M(T)-SA,SB

Flex-300A-M(T)-SA,SB

Two built-in proximity switches 
verify piston position, thus reliably 
checking the lock and unlock status.

  QCP-220     Model number:QCP-220

QCP-220

Weight capacity(Rated load) 2,156N(220kg)
Outer dimension (When coupled) φ229×H110mm
Product weight(Main body) Master Plate 8.4kg
  Tool Plate 3.6kg

  L16A,J16A     Model number:L16A(Master side only)/J16A(Tool side only)

L16A(Master side only)/J16A(Tool side only)

5A×16 (JM connector)

Use JMR2119M-D for the L16A on the Master side
Use JMR2116M-D for the J16A on the Master side
Use JMR2116F-D for the J16A on the Tool side

  J16B     Model number:QCP-M(T)-J16B

QCP-M(T)-J16B

5A×16 (JM connector)

Use JMR2116MX-D for the J16B on the Master side
Use JMR2116FX-D for the J16B on the Tool side

  M10B     Model number:QCP-220-M(T)-M10B

QCP-220-M(T)-M10B

13A×10 (MS connector)

Use D/ MS3102A18-9P on the Master side of M10B
Use D/ MS3102A18-19S on the Tool side of M10B
(Use RoHS-complant MS receptacle products.)

  B15NB,B15PB,B15DB     Model number:B15NB,B15PB(Master side only)/B15DB(Tool side only)

B15NB,B15PB(Master side only)/B15DB(Tool side only)

B15NB  NPN出力
B15PB  PNP出力

Receptacle connector: WEBR-2119S-D for B15NB and B15PB
Receptacle connector: WEBR-2116FS-D for B15DB
 

  P3WB     Model number:QCP-220-M(T)-P3WB

QCP-220-M(T)-P3WB

Rc3/8×2

  P38B     Model number:QCP-220-M(T)-P38B

QCP-220-M(T)-P38B

Rc3/8×4

  L16A-M     Model number:L16A-M

L16A-M

5A×16 (JM connector)

Use JMR2119M-D for the L16A on the Master side
Use JMR2116M-D for the J16A on the Master side
Use JMR2116F-D for the J16A on the Tool side

  QC-150C     Model number:QC-150C

QC-150C

Weight capacity(Rated load) 1,470N(150kg)
Outer dimension (When coupled)  φ200×H90mm
Product weight(Main body) Master Plate 5,810g
  Tool Plate 2,860g

  D37Z     Model number:QC-150C-M(T)-D37Z

QC-150C-M(T)-D37Z

3A×37 D-sub 37 contacts
(female receptacles)
※Plug side is DDK, 17 JE-23370-02 (D8A) –CG,  or its equivalent.

  J16Z     Model number:QC-150C-M(T)-J16Z

QC-150C-M(T)-J16Z

5A×16 (JM connector)

Use JMR2116M-D for the J16Z Master side
Use JMR2116F-D for the J16Z Tool side

  M10Z     Model number:QC-150C-M(T)-M10Z

QC-150C-M(T)-M10Z

13A×10 (MS connector)

Use D/MS3102A18-1P for the M10Z Master side
Use D/MS3102A18-1S for the M10Z Tool side

  M19Z     Model number:QC-150C-M(T)-M19Z

QC-150C-M(T)-M19Z

13A×19 (MS connector)

Use D/MS3102A22-14P for the M19Y Master side
Use D/MS3102A22-14S for the M19Y Tool side

  A16Z     Model number:QC-150C-M(T)-A16Z

QC-150C-M(T)-A16Z

Approach Sensor
5A×16 (JM connector)

Use JMR2119M-D for the A16Z Master side
Use JMR2119F-D for the A16Z Tool side

  A08Z     Model number:QC-150C-M(T)-A08Z

QC-150C-M(T)-A08Z

Approach Sensor
13A×8 (MS connector)

Use D/MS3102A18-1P for theA08Z Master side
Use D/MS3102A18-1S for the A08Z Tool side

  B15NZ,B15PZ,B15DZ     Model number:QC-150C-B15NZ,B15PZ,B15DZ

QC-150C-B15NZ,B15PZ,B15DZ

B15NZ  NPN output
B15PZ  PNP output

Receptacle connector: WEBR-2119S-D for B15NZ and B15PZ
Receptacle connector: WEBR-2116FS-D for B15DZ

  E50Z     Model number:QC-150C-M(T)-E50Z

QC-150C-M(T)-E50Z

Ground 500A×1

  P18Z     Model number:QC-150C-M(T)-P18Z

QC-150C-M(T)-P18Z

Rc1/8×4

  P14Z     Model number:QC-150C-M(T)-P14Z

QC-150C-M(T)-P14Z

Rc1/4×2

  P38Z     Model number:QC-150C-M(T)-P38Z

QC-150C-M(T)-P38Z

Rc3/8×4

  P3WZ     Model number:QC-150C-M(T)-P3WZ

QC-150C-M(T)-P3WZ

Rc3/8×2

  SA,SB     Model number:QC-150C-M(T)-SA,SB

QC-150C-M(T)-SA,SB

Two built-in proximity switches 
verify piston position, thus reliably 
checking the lock and unlock status.

  QCP-100A     Model number:QCP-100A

QCP-100A

Weight capacity(Rated load) 980N(100kg)
Outer dimension (When coupled) φ189×H50mm
Product weight(Main body) Master Plate 3.0k
  Tool Plate 1.7kg

  J16A,J16B     Model number:QCP-100A-M(T)-J16A,J16B

QCP-100A-M(T)-J16A,J16B

5A×16 (J16A・B)

JUse JMR2116M-D (DDK) for the J16A Master side
Use JMR2116F-D (DDK) for the J16A Tool side
Use JMR2116MX-D (DDK) for the J16B Master side
Use JMR2116FX-D (DDK) for the J16B Tool side
Use JMR2119M-D (DDK) for the J16A Master side

  M10A,M10B,L07A     Model number:QCP-!A-M(T)-M10A,M10B,L07A

QCP-!A-M(T)-M10A,M10B,L07A

13A×10 (M10A・B)
13A×7+lock/unlock signals (L07A)

Use D/MS3102A18-1P for the M10A and L07A Master side
Use D/MS3102A18-1S for the M10B Tool side
Use D/MS3102A18-19P for the M10B Master side
Use D/MS3102A18-19S for the M10B Tool side
(Use RoHS-compliant MS receptacle products)

  R16A,R16B     Model number:QCP-100A-M(T)-R16A,R16B

QCP-100A-M(T)-R16A,R16B

5A×16 (without a connector)
Please solder the hard-wiring (Please use 
J16A, J16B or L16A for the Master side)

  B15NA_B,B15PA/B,B15DA_B     Model number:QCP-100A-M(T)-B15NA_B,B15PA/B,B15DA_B

QCP-100A-M(T)-B15NA_B,B15PA/B,B15DA_B

B15NA/B  NPN output
B15PA/B  PNP output

Receptacle connector: WEBR-2119S-D for B15NA/B and B15PA/B
Receptacle connector: WEBR-2116FS-D for B15DA/B

  P38A,P38B     Model number:QCP-100A-M(T)-P38A,P38B

QCP-100A-M(T)-P38A,P38B

Rc3/8×4

  SA,SB     Model number:QCP-100A-M(T)-SA,SB

QCP-100A-M(T)-SA,SB

Two built-in proximity  switches verify piston 
position on and lock/ unlock status.

  Flex-100B     Model number:Flex-100B

Flex-100B

Weight capacity(Rated load) 980N(100kg)
Outer dimension (When coupled) φ178×H81.5mm
Product weight(Main body) Master Plate 3,900g
  Tool Plate 2,250g

  D15A,D15B     Model number:Flex-100-M(T)-D15A,D15B

Flex-100-M(T)-D15A,D15B

3A×15 D-sub 15 contacts
(female receptacles)
※Plug side is DDK. 17JE-23150-02( D8A) -CG or its equivalent.

  B15NA_B,B15PA_B,B15DA_B     Model number:Flex-100-M(T)-B15NA_B,B15PA_B,B15DA_B

Flex-100-M(T)-B15NA_B,B15PA_B,B15DA_B

B15NA/B  NPN output
B15PA/B  PNP output

Receptacle connector: WEBR-2119S-D for B15NA/B and B15PA/B
Receptacle connector: WEBR-2116FS-D for B15DA/B

  E50A,E50B     Model number:Flex-100B-M(T)-E50A,E50B

Flex-100B-M(T)-E50A,E50B

Ground 500A×1

  P18A,P18B     Model number:Flex-100B-M(T)-P18A,P18B

Flex-100B-M(T)-P18A,P18B

Rc1/8×4本

  P14A,P14B     Model number:Flex-100B-M(T)-P14A,P14B

Flex-100B-M(T)-P14A,P14B

Rc1/4×2

  P38A,P38B     Model number:Flex-100B-M(T)-P38A,P38B

Flex-100B-M(T)-P38A,P38B

Rc3/8×4

  P3WA,P3WB     Model number:Flex-100B-M(T)-P3WA,P3WB

Flex-100B-M(T)-P3WA,P3WB

Rc3/8×2

  SA,SB     Model number:Flex-100B-M-SA,SB

Flex-100B-M-SA,SB

Two built-in proximity switches verify piston 
position, thus reliably checking the lock and 
unlock status.

  Flex-70A     Model number:Flex-70A

Flex-70A

Weight capacity(Rated load) 686N(70kg)
Outer dimension (When coupled) φ139×H65mm
Product weight(Main body) Master Plate 1,900g
  Tool Plate 1,200g

  D15A,D15B     Model number:Flex-70A-M(T)-D15A,D15B

Flex-70A-M(T)-D15A,D15B

3A×15 D-sub 15 contacts
(female receptacles)
※Plug side is DDK, 17JE-23150-02(D8A) –CG, or its equivalent.

  J16A,J16B     Model number:Flex-70A-M(T)-J16A,J16B

Flex-70A-M(T)-J16A,J16B

5A×16 (JM connector)

Use JMR2116M-D for the J16A master side
Use JMR2116F-D for the J16A Tool side
Use JMR2116MX-D for the J16B Master side
Use JMR2116FX-D for the J16B Tool side

  M10A,M10B     Model number:Flex-70A-M(T)-M10A,M10B

Flex-70A-M(T)-M10A,M10B

13A×10 (MS connector)

Use D/MS3102A 18-1P for the M10A master side
Use D/MS3102A 18-1S for the M10A Tool side
Use D/MS3102A 18-19P for the M10B Master side
Use D/MS3102A 18-19S for the M10B Tool side

  A16A,A16B     Model number:Flex-70A-M(T)-A16A,A16B

Flex-70A-M(T)-A16A,A16B

Approach Sensor
5A×16 (JM connector)

Use JMR2119M-D for the A16A master side
Use JMR2116F-D for the A16A Tool side
Use JMR2119MX-D for the A16B Master side
Use JMR2116FX-D for the A16B Tool side

  A08A_A08B     Model number:Flex-70A-M(T)-A08A_A08B

Flex-70A-M(T)-A08A_A08B

Approach Sensor
13A×8 (MS connector)

Use D/MS3102A 18-1P for the A08A master side
Use D/MS3102A 18-1S for the A08A Tool side
Use D/MS3102A 18-19P for the A08B Master side
Use D/MS3102A 18-19S for the A08B Tool side

  B15NA_B,B15PA_B,B15DA_B     Model number:Flex-70A-M(T)-B15NA_B,B15PA_B,B15DA_B

Flex-70A-M(T)-B15NA_B,B15PA_B,B15DA_B

B15NA/B  NPN output
B15PA/B  PNP output

Receptacle connector: WEBR-2119S-D for B15NA/B and B15PA/B
Receptacle connector: WEBR-2116FS-D for B15DA/B

  E50A,E50B     Model number:Flex-70A-M(T)-E50A,E50B

Flex-70A-M(T)-E50A,E50B

Ground 500A×1

  P18A,P18B     Model number:Flex-70A-M(T)-P18A,P18B

Flex-70A-M(T)-P18A,P18B

Rc1/8×4

  P14A,P14B     Model number:P14A,P14B

P14A,P14B

Rc1/4×2

  P3WA,P3WB     Model number:P3WA,P3WB

P3WA,P3WB

Rc3/8×2

  SA,SB     Model number:SA,SB

SA,SB

Two built-in proximity switches 
verify piston position, thus reliably 
checking the lock and unlock status

  QC-60D     Model number:QC-60D

QC-60D

Weight capacity(Rated load) 588N(60kg)
Outer dimension (When coupled) φ130xH50mm
Product weight(Main body) Master Plate 1,340g
  Tool Plate 720g

  D15Y     Model number:QC-60D-M(T)-D15Y

QC-60D-M(T)-D15Y

3A×15 D-sub 15 contacts
(female receptacles)
※Plug side is DDK, 17 JE-23150-02 (D8A) –CG, or its equivalent.

  J16Y     Model number:QC-60D-M(T)-J16Y

QC-60D-M(T)-J16Y

5A×16 (JM connector)

Use JMR2116M-D for the J16Y Master side
Use JMR2116F-D for the J16Y Tool side

  M06Y     Model number:QC-60D-M(T)-M06Y

QC-60D-M(T)-M06Y

13A×6 (MS connector)

Use D/MS3102A14S-6P for the M06Y Master side
Use D/MS3102A14S-6S for the M06Y Tool side

  M10Y     Model number:QC-60D-M(T)-M10Y

QC-60D-M(T)-M10Y

13A×10 (MS connector)

Use D/MS3102A18-1P for the M10Y Master side
Use D/MS3102A18-1S for the M10Y Tool side

  B15NY,B15PY,B15DY     Model number:QC-60D-M(T)-B15NY,B15PY(Master side only),B15DY(Master side only)

QC-60D-M(T)-B15NY,B15PY(Master side only),B15DY(Master side only)

B15NY  NPN output
B15PY  PNP output

Receptacle connector: WEBR-2119S-D for B15NY and B15PY
Receptacle connector: WEBR-2116FS-D for B15DY

  P18Y     Model number:QC-60D-M(T)-P18Y

QC-60D-M(T)-P18Y

Rc1/8×4本

  P14Y     Model number:QC-60D-M(T)-P14Y

QC-60D-M(T)-P14Y

Rc1/4×2

  SA,SB     Model number:QC-60D-M(T)-SA,SB

QC-60D-M(T)-SA,SB

Two built-in proximity switches verify piston position, 
thus reliably checking the lock and unlock status.

  Flex-40B     Model number:Flex-40B

Flex-40B

Weight capacity(Rated load) 392N(40kg)
Outer dimension (When coupled)   φ115×H57mm
Product weight(Main body)  Master Plate 1,140g
   Tool Plate 610g

  D15A,D15B     Model number:Flex-40B-M(T)-D15A,D15B

Flex-40B-M(T)-D15A,D15B

3A×15 D-sub 15 contacts
(female receptacles)
※Plug side is DDK, 17JE-23150-02 (D8A) –CG,  or its equivalent.

  J16A,J16B     Model number:Flex-40B-M(T)-J16A,J16B

Flex-40B-M(T)-J16A,J16B

5A×16 (JM connector)

Use JMR2116M-D for the J16A master side
Use JMR2116F-D for the J16A Tool side
Use JMR2116MX-D for the J16B Master side
Use JMR2116FX-D for the J16B Tool side

  M10A,M10B     Model number:Flex-40B-M10A,M10B

Flex-40B-M10A,M10B

13A×10 (MS connector)

Use D/MS3102A18-1P for the M10A master side
Use D/MS3102A18-1S for the M10A Tool side
Use D/MS3102A18-19P for the M10B Master side
Use D/MS3102A18-19S for the M10B Tool side

  A16A,A16B     Model number:Flex-40B-M(T)-A16A,A16B

Flex-40B-M(T)-A16A,A16B

Approach Sensor
5A×16 (JM connector)

Use JMR2119M-D for the A16A master side
Use JMR2116F-D for the A16A Tool side
Use JMR2119MX-D for the A16B Master side
Use JMR2116FX-D for the A16B Tool side

  A08A,A08B     Model number:Flex-40B-M(T)-A08A,A08B

Flex-40B-M(T)-A08A,A08B

Approach Sensor
13A×8 (MS connector)

U se D/MS3102A18-1P for the A08A master side
Use D/MS3102A18-1S for the A08A Tool side
Use D/MS3102A18-19P for the A08B Master side
Use D/MS3102A18-19S for the A08B Tool side

  B15NA_B,B15PA_B,B15DA_B     Model number:Flex-40B-M(T)-B15NA_B,B15PA_B(Master side only),B15DA_B(Tool side only)

Flex-40B-M(T)-B15NA_B,B15PA_B(Master side only),B15DA_B(Tool side only)

B15NA/B  NPN output
B15PA/B  PNP output

Receptacle connector: WEBR-2119S-D for B15NA/B and B15PA/B
Receptacle connector: WEBR-2119FS-D for B15DA/B

  P18A,P18B     Model number:Flex-40B-M(T)-P18A,P18B

Flex-40B-M(T)-P18A,P18B

Rc1/8×4

  P14A,P14B     Model number:Flex-40B-M(T)-P14A,P14B

Flex-40B-M(T)-P14A,P14B

Rc1/4×2

  SA,SB     Model number:Flex-40B-M(T)-SA,SB

Flex-40B-M(T)-SA,SB

Two built-in proximity switches verify piston position, 
thus reliably checking the lock and unlock status.

  QC-20D     Model number:QC-20D

QC-20D

Weight capacity(Rated load)  196N(20kg)
Outer dimension (When coupled)  φ90×H45.4mm
Product weight(Main body) Master Plate 515g
  Tool Plate 355g


 

  DXPA     Model number:QC-20D-M(T)-DXPA

QC-20D-M(T)-DXPA

Pneumatic ports  M5×8

  DXPB     Model number:QC-20D-M(T)-DXPB

QC-20D-M(T)-DXPB

Pneumatic ports  M5×12

  DAPA     Model number:QC-20D-M(T)-DAPA

QC-20D-M(T)-DAPA

3A×15 D-Sub 15 contacts
( female receptacle )        
※Please provide a 17JE-23150-02(D8A)-CG plug or its equivalent.(D-sub plugs are RoHS.)
Pneumatic ports M15×12

  DAPB     Model number:QC-20D-M(T)-DAPB

QC-20D-M(T)-DAPB

3A×15本
Dサブ15コンタクト(雌レセプタクル)※2
空気圧ポートM5×12本

(※2)プラグ側は含んでおりません。17JE-23150-02(D8A)-CGまたは同等品をご用意ください。(Dサブ15コンタクト雄プラグネジM2.6)

  DBPA     Model number:QC-20D-M(T)-DBPA/

QC-20D-M(T)-DBPA/

3A×15 D-Sub 15 contacts
( female receptacle ) 
Pneumatic ports M15×12
※Please provide a 17JE-23150-02(D8A)-CG plug or its equivalent.(D-sub plugs are RoHS.)

Pneumatic ports M5×8

 

  D15N     Model number:QC-20D-M(T)-D15N

QC-20D-M(T)-D15N

3A×15 D-Sub 15 contacts
( female receptacle ) 
Pneumatic ports M15×12
※Please provide a 17JE-23150-02(D8A)-CG plug or its equivalent.(D-sub plugs are RoHS.)

  QC-10B     Model number:QC-10B

QC-10B

Weight capacity(Rated load) 98N(10kg)
Outer dimension (When coupled) φ50×H38.5mm
Product weight(Main body) Master Plate 245g
   Tool Plate 85g

  AP101     Model number:AP101

AP101

PCD:31.5
Bolt size:M5
Hole for locating pin:
2×φ5H7
Boss size:φ12h7
Boss Height:3mm
Accessories(Bolts and pin)
M5×10 ( 4 pcs )
MSY5-15 ( 1 pc )
Weight
(Including bolts and pins):
71g
 

  AP102     Model number:AP102

AP102

PCD:60
Bolt size:M5
Hole for locating pin:
φ5H7
Boss size:φ45H7
Boss Depth:Depth 10.5mm
Accessories(Bolts and pin):
M5×10 ( 4 pcs )
MSY5-15 ( 1 pc )
Weight
(Including bolts and pins)
68g

  AP103     Model number:AP103

AP103

PCD:56
Bolt size:M4
Hole for locating pin:
2×φ4H7
Boss size:φ62H7
Boss Depth:8mm
Accessories(Bolts and pin)
M5×10 ( 4 pcs )
MSY4-15 ( 1 pc )
Weight
(Including bolts and pins):
130g
 

  AP104     Model number:AP104

AP104

PCD:31.5
Bolt size:M5
Hole for locating pin:
φ5H7
Boss size:φ20h7
Boss Height:3mm
Accessories
(Bolts and pin):
M5×10 ( 7 pcs )
MSY5-15 ( 1 pc )
Weight
(Including bolts and pins):
79g ( Bolts 7pcs )
68g ( Bolts 7pcs )

  K10A     Model number:QC-10B-M(T)-K10A

QC-10B-M(T)-K10A

3A×10 (solder terminal)

  K20A     Model number:QC-10B-M(T)-K20A

QC-10B-M(T)-K20A

3A×20 (solder terminal)

  K10L     Model number:QC-10B-M(T)-K10L

QC-10B-M(T)-K10L

3A×10 (with 1m lead wires)

  K20L     Model number:QC-10B-M(T)-K20L

QC-10B-M(T)-K20L

3A×20 (with 1m lead wires)

  Light-5A     Model number:Light-5A

Light-5A

 
Weight capacity(Rated load) 49N(5kg)
Outer dimension (When coupled)   φ49mm×H48.5mm
Product weight(Main body) Master Plate 260g
  Tool Plate 100g

  H10A     Model number:Light-5A-M(T)-H10A

Light-5A-M(T)-H10A

3A×10 (solder terminal)

  H20A     Model number:Light-5A-M(T)-H20A

Light-5A-M(T)-H20A

3A×20 (solder terminal)

  H10L     Model number:Light-5A-M(T)-H10L

Light-5A-M(T)-H10L

3A×10 (with 1m lead wires)

  H20L     Model number:Light-5A-M(T)-H20L

Light-5A-M(T)-H20L

3A×20 (with 1m lead wires)

  H30A     Model number:Light-5A-M(T)-H30A

Light-5A-M(T)-H30A

3A×30 (solder terminal)

  SA○○     Model number:Light-5A-M(T)-SA○○

Light-5A-M(T)-SA○○

Adaptor for robots with shafts for mounting
Note : ○○ is shaft diameter.
(For example, for a diameter of φ8mm, use 08, 
for a diameter of φ16mm,use 16.)

  QC-1     Model number:QC-1

QC-1

 
Weight capacity(Rated load) 9.8N (1kg)
Outer dimension (When coupled)  φ32xH29mm
Product weight(Main body) Master Plate 60g
  Tool Plate 30g

                      

  D     Model number:QC-1-M(T)-D

QC-1-M(T)-D

3A×10 (solder terminal)

  P     Model number:QC-1-M(T) P

QC-1-M(T) P

For positive pressure M3×2

  V     Model number:QC-1-M(T)-V

QC-1-M(T)-V

For negative pressure M3×2

  QUICK-CHANGE GIGA     Model number:CUICK-CHANGE GIGA

CUICK-CHANGE GIGA

Weight capacity(Rated load) 6,860N(700kg)
Outer dimension (When coupled) φ350×H160mm
Product weight(Main body) Master Plate 25kg
  Tool Plate 15kg


 

  QUICK-CHANGE ZEUS     Model number:QUICK-CHANGE ZEUS

QUICK-CHANGE ZEUS

Weight capacity(Rated load) 1,470~2,254N(150~230kg)
Outer dimension (When coupled) φ226×H110mm
Product weight(Main body) Master Plate 5.4kg
  Tool Plate 2.3kg

To download CAD data
Contact registration is required.
Please register from here hereif you have not done it yet.

Register contact

CLOSE

© Copyright 2018 BL AUTOTEC, Ltd.All Rights Reserved.